Learning Objectives
FREE PREVIEWReading Material
FREE PREVIEWMultifrequency Systems
FREE PREVIEWSingle vs. Multifrequency Test Instruments2
FREE PREVIEWVideo on Phase Lag
Review
Module Quiz
Relating Surface Testing to Tube Testing
FREE PREVIEWDifferent Display Types for Surface Testing vs Tube Testing
Test Frequency Selection for Tubing
FREE PREVIEWImportance of Scan Direction in Data Analysis of Tubing
Bobbin Probes
Other Types of Probes Used for Tube Testing
Tube Inspections from Various Industries
FREE PREVIEWExamination Technique Specification Sheets (ETSS)
FREE PREVIEWCalibration Standard Drawings
FREE PREVIEWLandmark Tables
FREE PREVIEWThree Letter Codes and Definitions
FREE PREVIEWComponent (Heat Exchanger) Drawings
FREE PREVIEWTubesheet Maps
FREE PREVIEWData Acquisition Summary Form
Historical Inspection Raw Data Review
FREE PREVIEWTechnical Service Advisories or Operating Experience
FREE PREVIEWGlossary of Terms
Data Acquisition Process Overview for Tubing
Typical Bobbin Coil Data Analysis Calibration
FREE PREVIEWBasic Eddy Current Calibration for Tube Testing
FREE PREVIEWBasic Setup of Spans and Rotations for Tube Testing with the Bobbin Probe
Adjusting X:Y Gain for Tube Testing (And Why Not to Do It)
Voltage Normalization and Span Setting
Digital Mix Suppression
Creating a Two-Channel Tube Support Plate Suppression Mix
FREE PREVIEWCreating a Phase/Depth Curve for Sizing O.D. Pits
FREE PREVIEWCreating an Amplitude/Depth Curve for Sizing Wear Fretting
